HEPA Filtered Walk-Thru Air Shower Chamber
Removes Particulate Contamination
Minimum Velocity of 5000FPM
Cleanroom Air Showers are designed to supply ISO Class 5 (Class 100) airflow while removing particulate contamination from personnel entering a cleanroom. An individual can stand or walk through the chamber and be scrubbed by pressurized air from nozzles at a minimum velocity of 5000 FPM.
HEPA filtered air flows through wall mounted nozzles and contaminated air is forced through secondary filters located near the floor.
Fluorescent lighting is provided in the ceiling.
Voltage options are 208-230, 50 or 60 Hz and 440/480 volts, 3 phase, 60 Hz.
Air Showers are made from composition board covered with white high pressure laminate on both inside and outside surfaces.
Doors are made of high quality anodized aluminum frame with 1/4 inch clear insert and push/pull hardware. The interlock system allows only one door at a time to be open and releases if the power fails.
An optional painted steel finish is available.
Air Showers are shipped in wooden crates for on-site assembly.