Automatically Adjusts to Maintain Constant Airflow
SAM MicroSound ECM fan filter units key features include…
• Multi-use on-board Controller with either local POT control and monitoring or via MODBUS RTU network.
• Factory setup and addressing to match your project specifications.
• An electronically commutated motor that is programmed to increase the speed as the load increases to maintain a constant airflow.
• Torque programming also available for ducted applications.
• Low power consumption.
• Low sound levels.
SAM MicroSound ECM GS units feature a roomside removable filter element with a gel channel on the upstream side of the final filter which provides a leak-free seal between the filter and the filter housing.
SAM MicroSound ECM NCR units feature a low profile unit with an upstream gasket for a leakfree seal between the final filter and the SAM plenum.
Housings are fabricated from steel with a white powdercoat finish.
The ECM motor blower is a 1/3 HP, motor with a forward curved blower. Units are available in 115V (60 Hz), 208-230V (50/60Hz) and 277V (60 Hz).
SAM MicroSound Fan Filter Units include a 99.99% efficient HEPA filter, 30% ASHRAE pleated type prefilter, seismic clip suspension points.
Final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards. The standard HEPA filter is 99.99% eff. and an ULPA grade 99.9995% eff. filter is available as an option.
A polystyrene eggcrate grille in an anodized aluminum frame is hinged to open, permitting removal of the filter without removing the unit from the ceiling (GS models only). Optional perforated stainless steel or aluminum grilles are available.
Some of the many available options include: roomside motor access and challenge ports, duct collars, ULPA filtration and stainless steel construction.
Many control options are available, including MODBUS RTU protocol networking, infrared remote control, roomside digital display, or a complete SAMlink Control System.
For other control options or further information please consult with your Clean Rooms International representative or contact the factory.
GS-Style Filter Data: The HEPA Filter is designed for 90 FPM average face velocity @ initial 0.47 w.g. and has a rated efficiency of 99.99% @ 0.3 micron or larger. An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille. Final filters are replaceable from roomside.
NCR-Style Filter Data: The HEPA Filters are designed for 90 FPM average face velocity @ initial 0.47 w.g. and have a rated efficiency of 99.99% @ 0.3 micron or larger. An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille.
Final filters can be replaced by removing unit from ceiling, placing on a bench, removing and replacing the filter and re-installing unit in ceiling.
Access Port (GS Style Only): This port is located in the center of the filter element face and is used for introducing an upstream challenge or measuring static pressure.
Air Flow: Designed for 90 FPM +/- 20%. On 2×4 units at 90 FPM, the CFM is 630 for the NCR style and 520 for the GS style.
Sound Level: At 90 FPM with a clean unloaded HEPA filter and zero e.s.p. the sound level is 50-53 dBa. See table below.
|Mfg. Code||Model or Description||Style||Size||Voltage||Motor||HEPA Filter||Weight|
|12327||SAM22 MS ECM NCR||NCR||2×2||115||ECM||302070||66 lbs. (29.9 kg.)|
|12328||SAM22 MS ECM NCR||NCR||2×2||208-230||ECM||302070||66 lbs. (29.9 kg.)|
|12329||SAM22 MS ECM NCR||NCR||2×2||277||ECM||302070||66 lbs. (29.9 kg.)|
|12333||SAM24 MS ECM NCR||NCR||2×4||115||ECM||302090||77 lbs. (34.9 kg.)|
|12334||SAM24 MS ECM NCR||NCR||2×4||208-230||ECM||302090||77 lbs. (34.9 kg.)|
|12335||SAM24 MS ECM NCR||NCR||2×4||277||ECM||302090||77 lbs. (34.9 kg.)|
|12330||SAM22 MS ECM GS||GS||2×2||115||ECM||302201||81 lbs. (36.7 kg.)|
|12331||SAM22 MS ECM GS||GS||2×2||208-230||ECM||302201||81 lbs. (36.7 kg.)|
|12332||SAM22 MS ECM GS||GS||2×2||277||ECM||302201||81 lbs. (36.7 kg.)|
|12336||SAM24 MS ECM GS||GS||2×4||115||ECM||302200||101 lbs. (45.8 kg.)|
|12337||SAM24 MS ECM GS||GS||2×4||208-230||ECM||302200||101 lbs. (45.8 kg.)|
|12338||SAM24 MS ECM GS||GS||2×4||277||ECM||302200||101 lbs. (45.8 kg.)|
|Performance Data* (2 x 4 units**)|
|Style||Motor||Voltage||Hz||Watts @ 90FPM||CFM @ 90FPM||Running Amps @90FPM|
* Based on 60Hz, without a prefilter, 0.0″ ESP
** Consult factory for 2×2 units Performance testing based on Shortage multi-point velgrid with 2″ standoffs
|302201||2×2 GS Style HEPA Filter, 99.99% eff. @ 0.3 micron|
|302204||2×2 GS Style ULPA Filter, 99.9995% eff. @ 0.12 micron|
|302200||2×4 GS Style HEPA Filter, 99.99% eff. @ 0.3 micron|
|302203||2×4 GS Style ULPA Filter, 99.9995% eff. @ 0.12 micron|
|302070||2×2 NCR Style HEPA Filter, 99.99% eff. @ 0.3 micron|
|302071||2×2 NCR Style ULPA Filter, 99.9995% eff. @ 0.12 micron|
|302090||2×4 NCR Style HEPA Filter, 99.99% eff. @ 0.3 micron|
|302100||2×4 NCR Style ULPA Filter, 99.9995% eff. @ 0.12 micron|
|302190||Prefilter 20″x20″x1″, 30% ASHRAE efficient, pleated type|
|Popular Options: (Please choose from the following part numbers when ordering options)|
|Final Filters:||Air Conditioning Mixing Box:|
|302204 2 x 2 GS ULPA Filter 99.9995% eff.||19958 Slanted Top with 10” Duct Collar|
|302203 2 x 4 GS ULPA Filter 99.9995% eff.||19959 Slanted Top with 12” Duct Collar|
|302071 2 x 2 NCR ULPA Filter 99.9995% eff.||19947 Square with (2) 10” Duct Collars|
|302100 2 x 4 NCR ULPA Filter 99.9995% eff.||19948 Square with (2) 12” Duct Collars|
|302197 Extended Life Prefilter 20″ x 20″ x 2″||Roomside Speed Display/Control|
|Duct Collar Adapters:||MODBUS RTU Network|
|*19950 10” Duct Collar Adapter||SAMlink System w/PLC|
|*19951 12” Duct Collar Adapter||Infrared Remote|
|*19952 Side Load with 10” Duct Collar||Pilot Light:|
|*19953 Side Load with 12” Duct Collar||19700 NCR Style Red Pilot Light – (w/36″ lead for grid or ceiling mount) Light Indicates Power to Motor)|
|Grilles 1/8” Round Perforated: (40% open area)||19701 NCR Style Red Pilot Light w/Pressure Switch – (w/36″ lead for grid or ceiling mount) Light Indicates Power to Motor and Air Flow)|
|19506 2 x 2 CRF Anodized Alum. Grille and Frame||19702 GS/CRF Style Red Pilot Light – factory mounted in grille frame (Light Indicates Power to Motor)|
|19507 2 x 4 CRF Anodized Alum. Grille and Frame||19703 GS/CRF Style Red Pilot Light w/Pressure Switch – factory mounted in grille frame (Light Indicates Air Flow)|
|19508 2 x 2 CRF Round Perf w/1/8” Holes, White Powdercoated Grille and Frame||Miscellaneous:|
|19509 2 x 4 CRF Round Perf w/1/8” Holes, White Powdercoated Grille and Frame||703902 8’ Power Cord 110-120V Only|
|19511 2 x 4 CRF S.S. Rnd. Perf Grille w/Anodized Alum. Frame||603322 Gasket on Downstream Edge of Unit|
|19512 2 x 2 CRF S.S. Rnd. Perf Grille w/Anodized Alum. Frame||Magnehelic Gage: Refer to the Back of this Section|
|19525 2 x 2 CRF S.S. Perf Grille w/S.S Frame||Static Control: Refer to the Back of this Section|
|19514 2 x 4 CRF S.S. Perf Grille w/S.S Frame|
*When using on house HVAC systems, Please consult factory.
NOTE: Duct collar adapters #19950 & #19951 may be used without negating the UL listing. All other duct collars, air conditioning boxes, pilot lights, and adding other electrical components negates UL listing.
Receive a complimentary price quote for cleaning services that will fit your needs and your budget