SAM MicroSound Fan Filter Units include a 99.99% efficient HEPA filter, 30% ASHRAE pleated type prefilter, seismic clip suspension points, safety switch which disables the unit while servicing, and solid state variable speed control with RFI suppression, allowing the airflow to be fine tuned.
Housings are fabricated from steel with a white powdercoat finish and include seismic clip suspension points.
The energy efficient N310 motor blower is a low watt backward curved impeller, single phase, permanent split capacitor type motor blower assembly with thermal overload protection. Units are available in 115 Volt (60 Hz), 208-230 Volt (50/60 Hz) and 277 Volt (60 Hz).
Final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards. The standard HEPA filter is 99.99% eff. and an ULPA grade 99.9995% eff. filter is available as an option.
Other popular options include an 8’ power cord (115 Volt only), 99.9995% eff. ULPA grade final filter, UL 900 filters and duct collar adapters. Refer to the back of this section for more options and accessories.
For horizontal flow applications consult with one of our cleanroom experts in your area, or call the factory for more information.
SAM is a registered trademark owned by Clean Rooms International
NCR Style Filter Data: The HEPA Filters are designed for 90 FPM average face velocity @ initial 0.47 w.g. and have a rated efficiency of 99.99% @ 0.3 micron or larger. An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille.
Final filters can be replaced by removing unit from ceiling, placing on a bench, removing and replacing the filter and re-installing unit in ceiling.
Low Profile: All SAM MicroSound NCR Style Models are
Standard Ceiling Size: All 2’ x 4’ models are designed to fit a nominal 2’ x 4’ ceiling grid with a 22.5” x 46.5” standard opening.
Air Flow: Airflow ranges from 400 to 750 CFM for a 2 x 4 unit and 250 to 400 CFM for a 2 x 2 unit. At 90 FPM, CFM is nominal 632 on a 2 x 4 and 300 on a 2 x 2 unit respectively. Airflow for units running at 50 Hz will be about 20% less.
Sound Level: At average face velocity of 90 FPM measured 30” from face of filter, sound level is approximately 54 dba with less than 45 dba ambient sound level. Field conditions, voltage and method of testing could produce different results.
|Motor||Voltage||Hz||Watts||Running Amps||Start-Up Amps|
|302070||2×2 NCR Style HEPA Filter, 99.99% eff. @ 0.3 micron|
|302071||2×2 NCR Style ULPA Filter, 99.9995% eff. @ 0.12 micron|
|302013||2×3 NCR Style HEPA Filter, 99.99% eff. @0.3 micron|
|302015||2×3 NCR Style ULPA Filter, 99.9995% eff. @ 0.12 micron|
|302090||2×4 NCR Style HEPA Filter, 99.99% eff. @ 0.3 micron|
|302100||2×4 NCR Style ULPA Filter, 99.9995% eff. @ 0.12 micron|
|302190||Prefilter 20″x20″x1″, 30% ASHRAE efficient, pleated type|
|Mfg. Code||Model or Description||Style||Size||Voltage||Motor||Variable Speed Control||HEPA Filter||Weight|
|12100*||SAM22 MS NCR||NCR||2 x 2||115||N310||703084||302070||53 lbs. (24.0 kg.)|
|12101||SAM22 MS NCR||NCR||2 x 2||208-230||N310||703912||302070||53 lbs. (24.0 kg.)|
|12102*||SAM22 MS NCR||NCR||2 x 2||277||N310||703915||302070||53 lbs. (24.0 kg.)|
|12150*||SAM23 MS NCR||NCR||2 x 3||115||N310||703084||302013||57 lbs. (25.9 kg.)|
|12151||SAM23 MS NCR||NCR||2 x 3||208-230||N310||703912||302013||57 lbs. (25.9 kg.)|
|12152*||SAM23 MS NCR||NCR||2 x 3||277||N310||703915||302013||57 lbs. (25.9 kg.)|
|12261*||SAM24 MS NCR||NCR||2 x 4||115||N310||703084||302090||60 lbs. (27.2 kg.)|
|12262||SAM24 MS NCR||NCR||2 x 4||208-230||N310||703912||302090||60 lbs. (27.2 kg.)|
|12263*||SAM24 MS NCR||NCR||2 x 4||277||N310||703915||302090||60 lbs. (27.2 kg.)|
* UL Listed
Prefilter and Safety Switch are Standard on all Models
|Popular Options: (Please choose from the following part numbers when ordering options)|
|Final Filters:||Air Conditioning Mixing Box:|
|302071 2 x 2 NCR ULPA Filter 99.9995% eff.||19958 Slanted Top with 10” Duct Collar|
|302015 2 x 3 NCR ULPA Filter 99.9995% eff.||19959 Slanted Top with 12” Duct Collar|
|302100 2 x 4 NCR ULPA Filter 99.9995% eff.||19947 Square with (2) 10” Duct Collars|
|308001 2 x 2 NCR HEPA UL 900||19948 Square with (2) 12” Duct Collars|
|308002 2 x 4 NCR HEPA UL 900||Pilot Light:|
|308005 2 x 4 NCR ULPA UL 900||19700 NCR Style Red Pilot Light- (w/36″ lead for grid or ceiling mount (Light Indicates Power to Motor)|
|308007 2 x 2 NCR ULPA UL 900||19701 NCR Style Red Pilot Light w/Pressure Switch- (w/36″ lead for grid or ceiling mount (Light Indicates Power to Motor and Air Flow)|
|302072 2 x 2 NCR HEPA with Centerboard and Test Port||Radial Diffuser Grille:|
|302094 2 x 4 NCR HEPA with Centerboard and Test Port||19300 2 x 2 Radial Diffuser Grille|
|Prefilters:||19301 2 x 4 Radial Diffuser Grille|
|302197 Extended Life Prefilter 20″ x 20″ x 2″||Miscellaneous:|
|Duct Collar Adapters:||703902 8’ Power Cord 110-120V Only|
|19950 10” Duct Collar Adapter||603322 Gasket on Downstream Edge of Unit|
|19951 12” Duct Collar Adapter||Magnehelic Gage: Refer to the Back of this Section|
|19952 Side Load with 10” Duct Collar|
|19953 Side Load with 12” Duct Collar|
|19955 10” Top Load Duct Collar Adapter|
|19956 12” Top Load Duct Collar Adapter|
NOTE: Duct collar adapters #19950 & #19951 may be used without negating the UL listing. All other duct collars, air conditioning boxes, pilot lights, and adding other electrical components negates UL listing.
Receive a complimentary price quote for cleaning services that will fit your needs and your budget